Functional cellulose-derived epoxy cross-linked with BADGE resin to construct high-performance epoxy composites.

The development of equipped bio-based epoxy materials has been gaining much attention recently. Nevertheless, finding the balance between the structure and properties of materials remains a significant challenge. In this work, cellulose-based epoxy (PHPCEP) with "soft" and "hard" cooperative structures was designed and demonstrated to endow bisphenol A diglycidyl ether (BADGE) with excellent toughness, heat resistance, mechanical strength, glass transition temperature, thermal stability, and solvent resistance. When 5 wt% PHPCEP was incorporated into BADGE composites, the resulting materials exhibited the maximum flexural strength (121.9 MPa) and tensile strength (71.4 MPa), a high glass transition temperature (148.3 °C), and 10 wt% PHPCEP/BADGE demonstrated the highest impact strength (70.5 kJ/m2). These figures are 18.8 %, 16.1 %, 21.5 %, and 254.3 % higher than the corresponding values of neat BADGE. The results of dynamic mechanical properties and heat degradation of the cured specimens also suggest that PHPCEP/BADGE materials have superior stiffness and toughness than neat BADGE, which could be attributed to the strong interaction between PHPCEP and BADGE, delivering better thermal stability for the composites compared to the pristine resin. Considering the remarkable effect, this work provides an effective way of highly efficient utilization of abundant cellulose and a high-performance additive for composite materials.

Enantioselective Total Synthesis of the Marine Macrolides Salarins A and C.

Here we report the first total synthesis of the marine macrolide salarin C, a potent anticancer agent, and demonstrate the biomimetic oxidation-Wasserman rearrangement to access salarin A. This synthesis relies on L-proline catalysis to install a chlorohydrin function that masks the sensitive C16-C17 epoxide and potentially mimics the biosynthesis of these compounds where a related chlorohydrin may yield both THF- and epoxide-containing salarins. Additional and key features of the synthesis include (i) macrocycle formation via ring-closing metathesis, (ii) macrocyclic substrate-controlled epoxidation of the C12-C13 allylic alcohol, and (iii) a late-stage Julia-Kocienski olefination to install the side chain. Importantly, this work provides a platform for the synthesis of other salarins and analogues of these potentially important anticancer natural products.

Crosslinking of Epoxidized Natural Rubber with Borax for Self-Healing and Self-Repairing Properties: pH Dependence.

Epoxidized natural rubber (ENR) crosslinked using borax, which exhibits self-healing and self-repairing properties, is successfully developed. The crosslink formation of ENR by using borax under neutral and alkaline conditions is investigated. Fourier transform infrared spectroscopy (FTIR) shows that the borate-ester bond is formed in ENR prepared under both neutral and alkaline conditions, whereas boron nuclear magnetic resonance (11 B-NMR) results exhibit that the ENR prepared under alkaline conditions more actively forms crosslink networks with borax. Moreover, the crosslink density and gel content increase significantly with the presence of borax in alkaline conditions. The crosslink density and gel content of ENR with 10 phr borax are higher by 155% and 36%, respectively, than those of neat ENR. Furthermore, the formation of the crosslinking ENR by borax enhances self-healing and self-repairing properties. The healing efficiency significantly increases from 1.09% to 85.90%, when ENR is developed under alkaline conditions with 30 phr borax. These results represent the first successful demonstration of the efficient use of borax as a crosslinker in ENR, which exhibits its promising self-healing and self-repairing properties under atmospheric conditions without the need for external stimuli. The ENR prepared in this work holds great promise for various self-healing rubber applications.

Pharmacological activity and clinical progress of Triptolide and its derivatives LLDT-8, PG490-88Na, and Minnelide: a narrative review.

Triptolide, a compound isolated from a Chinese medicinal herb, has potent antitumor, immunosuppressive, and anti-inflammatory properties. Due to its interesting structural features and diverse pharmacological activities, it has attracted great interest by the Society of Organic Chemistry and Pharmaceutical Chemistry. However, its clinical potential is greatly hampered by limited aqueous solubility and oral bioavailability, and multi-organ toxicity. In recent years, various derivatives of Triptolide have made varying degrees of progress in the treatment of inflammatory diseases, autoimmune diseases, and cancer. The most researched and potentially clinically valuable of them were (5R)-5-hydroxytriptolide (LLDT-8), PG490-88Na (F6008), and Minnelide. In this review, we provide an overview of the advancements made in triptolide and several of its derivatives' biological activity, mechanisms of action, and clinical development. We also summarized some prospects for the future development of triptolide and its derivatives. It is hoped to contribute to a better understanding of the progress in this field, make constructive suggestions for further studies of Triptolide, and provide a theoretical reference for the rational development of new drugs.

Synthesis and Conformational Analysis of FR901464-Based RNA Splicing Modulators and Their Synergism in Drug-Resistant Cancers.

FR901464 is a cytotoxic natural product that binds splicing factor 3B subunit 1 (SF3B1) and PHD finger protein 5A (PHF5A), the components of the human spliceosome. The amide-containing tetrahydropyran ring binds SF3B1, and it remains unclear how the substituents on the ring contribute to the binding. Here, we synthesized meayamycin D, an analogue of FR901464, and three additional analogues to probe the conformation through methyl scanning. We discovered that the amide-containing tetrahydropyran ring assumes only one of the two possible chair conformations and that methylation of the nitrogen distorts the chair form, dramatically reducing cytotoxicity. Meayamycin D induced alternative splicing of MCL-1, showed strong synergism with venetoclax in drug-resistant lung cancer cells, and was cancer-specific over normal cells. Meayamycin D incorporates an alkyl ether and shows a long half-life in mouse plasma. The characteristics of meayamycin D may provide an approach to designing other bioactive L-shaped molecules.

Mechanistic insight into homogeneous catalytic crosslinking behavior between cellulose and epoxide by explicit solvent models.

Inspired by recent advances on functional modification of cellulosic materials, the crosslinking behaviors of epoxide with cellulose under the catalysis of different homogeneous catalysts including H2O, Brønsted acid, Brønsted base, Lewis acid and neutral salt were systematically investigated using density functional theory (DFT) methods with hybrid micro-solvation-continuum approach. The results showed that catalytic activity, reaction mechanism and regioselectivity are determined by the combined effect of catalyst type, electronic effect and steric hindrance. All the homogeneous catalysts have catalytic activity for the crosslinking reaction, which decreases in the order of NaOH > HCl > NCl3 > MCl2 > CH3COOH > NaCl (N = Fe3+, Al3+; M = Zn2+, Ca2+). Upon the catalysis of NaOH, hydroxyl group of cellulose is firstly deprotonated to form a carbanion-like intermediate which will further attack the less sterically hindered C atom of epoxide showing excellent regioselectivity. Acidic catalysts readily cause epoxide protonated, which suffers from nucleophilic attack of cellulose and forms the carbocation-like intermediate. Brønsted acid exhibits poor regioselectivity, however, Lewis acid shows an interesting balance between catalytic activity and regioselectivity for the crosslinking reaction, which may be attributed to the unique catalysis and stabilization effects of its coordinated H2O on the transition state structure.

The synthesis of multifunctional cellulose graft alternating copolymers of 3,4-dihydrocoumarin and epoxides in DBU/DMSO/CO2 solvent system.

Cellulose graft copolymers having well-defined structures could incorporate the characteristics of both the cellulose skeleton and side chains, providing a new method for the preparation functionalised cellulose derivatives. Herein, a series of multifunctional cellulose grafted, alternating 3,4-dihydrocoumarin (DHC) and epoxide (EPO) copolymers (cell-g-P(DHC-alt-EPO)) were prepared in a metal-free DBU/DMSO/CO2 solvent system without adding additional catalyst. Four examples of cell-g-P(DHC-alt-EPO) with tunable thermal and optical properties were synthesized by copolymerization of DHC with styrene oxide (SO), propylene oxide (PO), cyclohexene oxide (CHO) or furfuryl glycidyl ether (FGE) onto cellulose. The nonconjugated cell-g-P(DHC-alt-EPO) showed UV absorption properties with the maximum absorption peak at 282 nm and 295 nm and photoluminescence performance. A clustering-triggered emission mechanism was confirmed and consistent with DFT theoretical calculations. In DMSO solution, the copolymer (DHCSO5) with DP of 11.64 showed ACQ behaviour as the concentration increased. In addition, DHCSO5 had good antioxidant capacity with an instantaneous radical scavenging activity of 2,2-diphenyl-1-picrylhydrazine (DPPH) up to 65 % at a concentration of 40 mg/ ml and increased to 100 % after 30 min. Thus, the multifunctional cell-g-P(DHC-alt-EPO) materials had a variety of potential applications in the fields of fluorescent printing, bio-imaging, UV- shielding and antioxidants.

Performance of cross-linked enzyme crystals of engineered halohydrin dehalogenase HheG in different chemical reactor systems.

Halohydrin dehalogenase HheG is an industrially interesting biocatalyst for the preparation of different ß-substituted alcohols starting from bulky internal epoxides. We previously demonstrated that the immobilization of different HheG variants in the form of cross-linked enzyme crystals (CLECs) yielded stable and reusable enzyme immobilizes with increased resistance regarding temperature, pH, and the presence of organic solvents. Now, to further establish their preparative applicability, HheG D114C CLECs cross-linked with bis-maleimidoethane have been successfully produced on a larger scale using a stirred crystallization approach, and their application in different chemical reactor types (stirred tank reactor, fluidized bed reactor, and packed bed reactor) was systematically studied and compared for the ring opening of cyclohexene oxide with azide. This revealed the highest obtained space-time yield of 23.9 kgproduct gCLEC -1 h-1 Lreactor volume -1 along with the highest achieved product enantiomeric excess [64%] for application in a packed-bed reactor. Additionally, lyophilization of those CLECs yielded a storage-stable HheG preparation that still retained 67% of initial activity (after lyophilization) after 6 months of storage at room temperature.

Systematic Development of Vanadium Catalysts for Sustainable Epoxidation of Small Alkenes and Allylic Alcohols.

The catalytic epoxidation of small alkenes and allylic alcohols includes a wide range of valuable chemical applications, with many works describing vanadium complexes as suitable catalysts towards sustainable process chemistry. But, given the complexity of these mechanisms, it is not always easy to sort out efficient examples for streamlining sustainable processes and tuning product optimization. In this review, we provide an update on major works of tunable vanadium-catalyzed epoxidations, with a focus on sustainable optimization routes. After presenting the current mechanistic view on vanadium catalysts for small alkenes and allylic alcohols' epoxidation, we argue the key challenges in green process development by highlighting the value of updated kinetic and mechanistic studies, along with essential computational studies.

Isotope Labeling Mass Spectrometry to Quantify Endogenous and Exogenous DNA Adducts and Metabolites of 1,3-Butadiene In Vivo.

Human exposure to known carcinogen 1,3-butadiene (BD) is common due to its high concentrations in automobile exhaust, cigarette smoke, and forest fires, as well as its widespread use in the polymer industry. The adverse health effects of BD are mediated by epoxide metabolites such as 3,4-epoxy-1-butene (EB), which reacts with DNA to form 1-hydroxyl-3-buten-1-yl adducts on DNA nucleobases. EB-derived mercapturic acids (1- and 2-(N-acetyl-l-cysteine-S-yl)-1-hydroxybut-3-ene (MHBMA) and N-acetyl-S-(3,4-dihydroxybutyl)-l-cysteine (DHBMA)) and urinary N7-(1-hydroxyl-3-buten-1-yl) guanine DNA adducts (EB-GII) have been used as biomarkers of BD exposure and cancer risk in smokers and occupationally exposed workers. However, low but significant levels of MHBMA, DHBMA, and EB-GII have been reported in unexposed cultured cells, animals, and humans, suggesting that these metabolites and adducts may form endogenously and complicate risk assessment of butadiene exposure. In the present work, stable isotope labeling in combination with high-resolution mass spectrometry was employed to accurately quantify endogenous and exogenous butadiene metabolites and DNA adducts in vivo. Laboratory rats were exposed to 0.3, 0.5, or 3 ppm of BD-d6 by inhalation, and the amounts of endogenous (d0) and exogenous (d6) DNA adducts and metabolites were quantified in tissues and urine by isotope dilution capillary liquid chromatography/high resolution electrospray ionization tandem mass spectrometry (capLC-ESI-HRMS/MS). Our results reveal that EB-GII adducts and MHBMA originate exclusively from exogenous exposure to BD, while substantial amounts of DHBMA are formed endogenously. Urinary EB-GII concentrations were associated with genomic EB-GII levels in tissues of the same animals. Our findings confirm that EB-GII and MHBMA are specific biomarkers of exposure to BD, while endogenous DHBMA predominates at sub-ppm exposures to BD.

Diamine-modified porous indium frameworks with crystalline porous materials (CPM)-5 structure for carbon dioxide fixation under co-catalyst and solvent free conditions.

In the present work, functional diamine groups into indium frameworks to synthesize cyclic carbonates from CO2 and epoxides with efficient catalytic activity in the absence of co-catalyst and solvent are reported for the first time. Crystalline porous materials (CPM)-5 modified with 1,2-phenylene diamine and ethylene diamine (CPM-5-PhDA and CPM-5-EDA), were prepared using a post-synthetic modification (PSM) method. The properties of the modified CPM-5 were characterized by powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), N2-adsorption, scanning electron microscopy (SEM), CO2 adsorption, and temperature programmed desorption TPD methods. The presence of diamine groups as basic sites and indium Lewis acid sites in the framework structure were desirable for high catalytic activity. For a given catalyst weight, CPM-5-PhDA was the best candidate to appear with great catalytic activity and selectivity for the cycloaddition reaction at 100°C and 1 MPa CO2 under co-catalyst and solvent free conditions. CPM-5-PhDA also was found to afford large and bulky epoxides. The catalyst can be easily separated and reused five times without any decline in activity.

Biobased epoxidized natural rubber/sodium carboxymethyl cellulose composites with enhanced strength and healing ability.

Conventional vulcanized rubbers cause a non-negligible waste of resources due to the formation of 3D irreversible covalently cross-linked networks. The introduction of reversible covalent bonds, such as reversible disulfide bonds, into the rubber network, is an available solution to the above problem. However, the mechanical properties of rubber with only reversible disulfide bonds cannot meet most practical applications. In this paper, a strengthened bio-based epoxidized natural rubber (ENR) composite reinforced by sodium carboxymethyl cellulose (SCMC) was prepared. SCMC forms a mass of hydrogen bonds between its hydroxyl groups and the hydrophilic groups of ENR chain, which gives the ENR/2,2'-Dithiodibenzoic acid (DTSA)/SCMC composites an enhanced mechanical performance. With 20 phr SCMC, the tensile strength of the composite increases from 3.0 to 10.4 MPa, which is almost 3.5 times that of the ENR/DTSA composite without SCMC. Simultaneously, DTSA covalently cross-linked ENR with the introduction of reversible disulfide bonds, which enables the cross-linked network to rearrange its topology at low temperatures and thus endows the ENR/DTSA/SCMC composites with healing properties. The ENR/DTSA/SCMC-10 composite has a considerable healing efficiency of about 96 % after healing at 80 °C for 12 h.

Cobalt-Catalyzed Stereospecific C-N/C-O Bond Formation of Oxiranes with Diaziridines.

Co-catalyzed stereospecific C-N and C-O bond formation of oxiranes with diaziridines has been accomplished to furnish tetrahydro-[1,3,4]-oxadiazines at room temperature. Optically active oxiranes can be coupled with high optical purities (>96% ee). Stereoselectivity, functional group tolerance, mechanistic studies using DFT, and natural product modification are the important practical features.

Epoxide Hydrolases: Multipotential Biocatalysts.

Epoxide hydrolases are attractive and industrially important biocatalysts. They can catalyze the enantioselective hydrolysis of epoxides to the corresponding diols as chiral building blocks for bioactive compounds and drugs. In this review article, we discuss the state of the art and development potential of epoxide hydrolases as biocatalysts based on the most recent approaches and techniques. The review covers new approaches to discover epoxide hydrolases using genome mining and enzyme metagenomics, as well as improving enzyme activity, enantioselectivity, enantioconvergence, and thermostability by directed evolution and a rational design. Further improvements in operational and storage stabilization, reusability, pH stabilization, and thermal stabilization by immobilization techniques are discussed in this study. New possibilities for expanding the synthetic capabilities of epoxide hydrolases by their involvement in non-natural enzyme cascade reactions are described.

One-step synthesis of nitrogen-rich organic polymers for efficient catalysis of CO2 cycloaddition.

Nitrogen-rich organic polymer poly(chloride triazole) (PCTs) was synthesized by a one-step method as metal-halogen-free heterogeneous catalyst for the solvent-free CO2 cycloaddition. PCTs had abundant nitrogen sites and hydrogen bond donors, exhibited great activity for the cycloaddition of CO2 and epichlorohydrin, and achieved 99.6% yield of chloropropene carbonate under the conditions of 110 ℃, 6 h, and 0.5 MPa CO2. The activation of epoxides and CO2 by hydrogen bond donor and nitrogen sites was further explained by density functional theory (DFT) calculations. In summary, this study showed that nitrogen-rich organic polymer is a versatile platform for CO2 cycloaddition, and this paper provides a reference for the design of CO2 cycloaddition catalysts.

Epoxide-Based Synthetic Approaches toward Polypropionates and Related Bioactive Natural Products.

Polypropionate units are a common structural feature of many of the natural products in polyketides, some of which have shown a broad range of antimicrobial and therapeutic potential. Polypropionates are composed of a carbon skeleton with alternating methyl and hydroxy groups with a specific configuration. Different approaches have been developed for the synthesis of polypropionates and herein we include, for the first time, all of the epoxide-based methodologies that have been reported over the years by several research groups such as Kishi, Katsuki, Marashall, Miyashita, Prieto, Sarabia, Jung, McDonald, etc. Several syntheses of polypropionate fragments and natural products that employed epoxides as key intermediates have been described and summarized in this review. These synthetic approaches involve enatio- and diastereoselective synthesis of epoxides (epoxy-alcohols, epoxy-amides, and epoxy-esters) and their regioselective cleavage with carbon and/or hydride nucleophiles. In addition, we included a description of the isolation and biological activities of the polypropionates and related natural products that have been synthetized using epoxide-based approaches. In conclusion, the epoxide-based methodologies are a non-aldol alternative approach for the construction of polypropionate.

Synthesis and Characterization of New Lutidinium Ionic Liquid-Supported Vanadylsalicylaldoxime Complex for Catalytic Application in Epoxidation Reaction.

A new chelating task-specific ionic liquid (TSIL), lutidinium-based salicylaldoxime (LSOH), and its square pyramidal vanadyl(II) complex (VO(LSO)2 ) have been successfully synthesized and structurally characterized using elemental (CHN), spectral, and thermal analyses. The catalytic activity of the lutidinium-salicylaldoxime complex (VO(LSO)2 ) in the alkene epoxidation reactions was studied under various reaction conditions, such as solvent effect, alkene/oxidant molar ratio, pH, reaction temperature, reaction time, and the catalyst dose. The results demonstrated that the CHCl3 solvent, 1 : 3 of the cyclohexene/H2 O2 ratio, pH 8, temperature of 340 K, and catalyst dose of 0.012 mmol are assigned as the optimum conditions for achieving maximum catalytic activity for VO(LSO)2 . Moreover, the VO(LSO)2 complex has the potential for application in the effective and selective epoxidation of alkenes. Notably, under optimal VO(LSO)2 conditions, cyclic alkenes convert more efficiently to their corresponding epoxides than linear alkenes.

Enantioconvergent hydrolysis of racemic 1,2-epoxypentane and 1,2-epoxyhexane by an engineered Escherichia coli strain overexpressing a novel Streptomyces fradiae epoxide hydrolase.

In order to excavate microbial epoxide hydrolases (EHs) with desired catalytic properties, a novel EH, SfEH1, was identified based on the genome annotation of Streptomyces fradiae and sequence alignment analysis with local protein library. The SfEH1-encoding gene, sfeh1, was then cloned and over-expressed in soluble form in Escherichia coli/BL21(DE3). The optimal temperature and pH of recombinant SfEH1 (reSfEH1) and reSfEH1-expressing E. coli (E. coli/sfeh1) were both determined as 30 â„ƒ and 7.0, also indicating that the influences of temperature and pH on reSfEH1's activities were more obvious than those of E. coli/sfeh1 whole cells. Subsequently, using E. coli/sfeh1 as catalyst, its catalytic properties towards thirteen common mono-substituted epoxides were tested, in which E. coli/sfeh1 had the highest activity of 28.5 U/g dry cells for rac-1,2-epoxyoctane (rac-6a), and (R)-1,2-pentanediol ((R)-3b) (or (R)-1,2-hexanediol ((R)-4b)) with up to 92.5% (or 94.1%) eep was obtained at almost 100% conversion ratio. Regioselectivity coefficients (αS and ßR) displayed in the enantioconvergent hydrolysis of rac-3a (or rac-4a) were calculated to be 98.7% and 93.8% (or 95.2% and 98.9%). Finally, the reason of the high and complementary regioselectivity was confirmed by both kinetic parameter analysis and molecular docking simulations.

Epoxidation of Methyl Esters as Valuable Biomolecules: Monitoring of Reaction.

The paper is focused on the epoxidation of methyl esters prepared from oil crops with various profiles of higher fatty acids, especially unsaturated, which are mainly contained in the non-edible linseed and Camelina sativa oil (second generation). The novelty consists in the separation and identification of all products with oxirane ring formed through a reaction and in the determination of time course. Through the epoxidation, many intermediates and final products were formed, i.e., epoxides with different number and/or different position of oxirane rings in carbon chain. For the determination, three main methods (infrared spectroscopy, high-pressure liquid chromatography and gas chromatography with mass spectrometry) were applied. Only gas chromatography enables the separation of individual epoxides, which were identified on the base of the mass spectra, molecule ion and time course of products. The determination of intermediates enables: (i) control of the epoxidation process, (ii) determination of the mixture of epoxides in detail and so the calculation of selectivity of each product. Therefore, the epoxidation will be more environmentally friendly especially for advanced applications of non-edible oil crops containing high amounts of unsaturated fatty acids.

Biocatalytic Cascade Synthesis of Enantioenriched Epoxides and Triols from Biomass-Derived Synthons Driven by Specifically Designed Enzymes.

Multi-enzymatic cascades exploiting engineered enzymes are a powerful tool for the tailor-made synthesis of complex molecules from simple inexpensive building blocks. In this work, we engineered the promiscuous enzyme 4-oxalocrotonate tautomerase (4-OT) into an effective aldolase with 160-fold increased activity compared to 4-OT wild type. Subsequently, we applied the evolved 4-OT variant to perform an aldol condensation, followed by an epoxidation reaction catalyzed by a previously engineered 4-OT mutant, in a one-pot two-step cascade for the synthesis of enantioenriched epoxides (up to 98 % ee) from biomass-derived starting materials. For three chosen substrates, the reaction was performed at milligram scale with product yields up to 68 % and remarkably high enantioselectivity. Furthermore, we developed a three-step enzymatic cascade involving an epoxide hydrolase for the production of chiral aromatic 1,2,3-prim,sec,sec-triols with high enantiopurity and good isolated yields. The reported one-pot, three-step cascade, with no intermediate isolation and being completely cofactor-less, provides an attractive route for the synthesis of chiral aromatic triols from biomass-based synthons.